A washer that won't fill, fills slowly, or won't drain usually comes down to the water inlet valve or the drain pump. In Hollywood's stacked-unit apartment installs, hose routing in a tight closet is worth checking too, alongside the components themselves.
Water inlet valve and drain pump repair for Hollywood, Portland washers covers both the fill side (the valve letting water in) and the drain side (the pump emptying it out). We test water pressure at the valve and check the drain hose and pump for a clog or a failed pump motor before recommending a part — and a leaking valve or hose connection is worth fixing quickly, since the sooner it's addressed, the less risk to the unit below in a multi-story building.
A leaking valve or hose connection in a ground-floor house is one thing; the same leak in an upper-floor Hollywood apartment can affect the unit below. That's one more reason to address a leak quickly rather than waiting — the sooner it's fixed, the less risk to your floors and to the space below.
A weak or absent fill usually points to a partially closed shutoff valve, a clogged inlet screen, or a failing inlet valve. We check all three before replacing a part.
Commonly a clogged drain hose, a clogged pump, or a failed pump motor. In a tight closet install, a kinked hose is also worth checking, since routing space is more limited than in an open laundry room.
Straight answers — no clicking around.
See the full Hollywood service area page, our general water valve & drain pump repair page, or the homepage.
Call Portland Washer Repair to schedule a same-day or next-day diagnostic visit.
(888) 555-0123